The ongoing development of Scania V8 engines by the company’s team of engineers continues into the 2020s, resulting in even more fuel-efficient engines suited for the most demanding transportation tasks.
“We build upon Scania’s vast V8 experience and continue to improve what generations of skilled engineers have learnt, created and achieved before us,” says Göran Lindh, Chief Engineer for Scania’s V8 engines.
“There are no quantum leaps, it is all about refining things and adding the latest technology. The new Engine Management System (EMS) enables a smarter and more advanced engine control software with higher accuracy. We can, for instance, calculate more precisely how much fuel is needed, and when.”
The EMS interacts with the Aftertreatment Management System (AMS). Both are critical when it comes to meeting the current and coming Euro 6 regulations regarding nitrogen oxides (NOx) and particulate matter – not only when the truck is new, but also over time as the legal demand is for at least seven years or 700,000 kilometres.
Scania has added a new solution where AdBlue fluid is injected twice; once directly after the exhaust brake, with a second dose at the regular position within the silencer itself. With the extra dosing, the evaporation of the AdBlue is improved during low load cycles as the temperature is higher near the outlet manifold. With the extra dosing, the aftertreatment strategy is improved and contributes to better fuel efficiency.
The updated V8 range is now equipped with a new high-pressure fuel pump where the pumping elements are individually controlled via Active Inlet Metering (AIM).
The overall pressure and inlet control are enhanced with improved diagnostics for increased uptime and performance. The new pump is also optimised for minimizing engine oil consumption, and the compression ratio and maximum cylinder pressure have been raised to further improve combustion and fuel efficiency.
An important aim when designing modern, high-performance engines is to reduce internal friction. By reducing internal losses, substantial gains have been achieved.
While the use of thinner, more effective modern oils is a factor here, the improvements in advanced long-life oils in recent years are not sufficient on their own; the engine itself must also be developed to capitalise on the possibilities: “Raising the pressure and the power output requires that several components inside the engine, including gears, pistons, rings, cylinder heads and valves, are refined and reinforced,” says Lindh.
“This necessitates advanced fine-tuning and improvements to reduce internal losses, especially since we also wanted to extend maintenance intervals and strengthening durability. I am proud to say that we have managed to reconcile these somewhat conflicting objectives.”
NEW KING OF THE ROAD
The range-topping member of Scania’s V8 family is the new DC16 123 engine. With its output of 770 horsepower it replaces the previous highest output model which provided 730 horsepower.
A major difference between them is that the 770 horsepower V8 is based on the same, updated platform as the rest of the new V8 range. “Here the biggest difference is evident,” says Lindh.
“The increased power comes together with significant fuel savings, savings that we were able to reach thanks to the introduction of the latest technologies. It has a Selective Catalytic Reduction (SCR) only after-treatment system, a robust, fixed geometry turbocharger and the same kind of single-bank exhaust manifolds as the other three.”
The shedding of some components and simplifying others has lowered the weight by 75 kilogrammes compared to its predecessor. Another new feature is that for increased responsiveness, the 770 horsepower power unit has a unique, fixed geometry turbocharger with ball bearings rather than traditional journal bearings.
“The new single-bank manifolds actually come with a perk,” explains Lindh.
“Not only are they lighter and more efficient, but they also contribute to the distinctive V8 sound that so many Scania customers and V8 fans appreciate. It does not generate more noise, rather it is the result of how the exhaust gases are allowed to collide due to the firing order, and inside the manifold on their way out.”
POWER ON DEMAND
Regardless which of the four new Scania V8 units is chosen for an application or specific transportation task, all are strong bearers of the heritage and reputation for reliability, robustness and power built by Scania’s V8s over more than five decades: “These are truly magnificent engines, with a short, sturdy crankshaft and smooth power delivery from the multicylinder configuration. Our famous Scania V8s are without comparison when both transport efficiency and load carrying capacity are in the equation,” concludes Lindh.-- Tradearabia News Service